F. A. Q. - Frequently Asked Questions

Please ensure that you are using the latest driver versions. You can obtain the latest drivers from our webpage.

An Overview of the Questions

Question 1:
The manual says that channels can also be added manually. How?

Question 2:
During timeshifting and recording with the included software Intervideo WinDVR3 the sound is distorted. How can this be corrected?

Question 3:
Does using the Cinergy 200 USB require a USB 2 port?

Question 4:
While installing the Microsoft Hotfix (MS Hotfix 822603) an error occurs. The Hotfix cannot be installed (KB 822603 Setup Error).

Question 5:
Which operating systems are supported?

Question 6:
The channel search doesnt find any/all of the channels. What can I do?

Question 7:
The included DVD player software asks for a product key during installation. Do I need a key?

Question 8:
Why does the sound shut off after 2 minutes watching TV?

Question 9:
I have connected the mini-jack to my notebook (Line In/Mic In), but no sound comes out of the notebook speakers. How can I correct this?

Question 1:
The manual says that channels can also be added manually. How?

Answer 1:
Unfortunately this function was not yet implemented in the first software release (3.23). Please check our website occasionally for an updated version.

y

Question 2:
During timeshifting and recording with the included software Intervideo WinDVR3 the sound is distorted. How can this be corrected?

Answer 2:
Start WinDVR3, press the right mouse button on the TV window and choose "Setup". Go to the "TV" tab and select the "Mono" audio mode.

y

Question 3:
Does using the Cinergy 200 USB require a USB 2 port?

Answer 3:
Yes. USB 1.x data transfer is too slow to be used here. The Cinergy cannot be used with USB 1 (not even a limited functionalty is possible).

y

Question 4:
While installing the Microsoft Hotfix (MS Hotfix 822603) an error occurs. The Hotfix cannot be installed (KB 822603 Setup Error).

Answer 4:
Make sure the Region and Language settings in the Windows Control Panel reflect the correct language for the country/location.

y

Question 5:
Which operating systems are supported?

Answer 5:
The Cinergy 200 USB can be used under Windows 2000 or XP. Windows 9x support is not possible due to general OS limitations regarding USB 2 implementation in a 9x environment.

y

Question 6:
The channel search doesnt find any/all of the channels. What can I do?

Answer 6:
Make sure the Region and Language settings in the Windows Control Panel reflect the correct language for the country/location.

Also check which version of DirectX is installed on your system. (Start/Run --> "dxdiag"). If DirectX 9.0b is installed the frequency table for the channel search is most likely not included. Microsoft offers an update for this problem at: http://support.microsoft.com/?kbid=825116

y

Question 7:
The included DVD player software asks for a product key during installation. Do I need a key?

Answer 7:
This key request only occurs when the Cinergy is not installed. Please install the Cinergy driver and software first. Afterwards the software DVD player can be installed without a key.

y

Question 8:
Why does the sound shut off after 2 minutes watching TV?

Answer 8:
This problem happens under Windows XP with Servive Pack 1. It is related to the Windows Messenger, you can resolved it by disabling the Messenger as well as the "MSN messenger check" in your anti-virus software. (for example Norton Anti Virus 2003). This problem should be solved in the next Service Pack.

y

Question 9:
I have connected the mini-jack to my notebook (Line In/Mic In), but no sound comes out of the notebook speakers. How can I correct this?

Answer 9:
1. Open the Windows mixer by double clicking on the loudspeaker symbol in the tray (next to the clock). Check to see if the input you have used is displayed in the mixer menu.

2. If not, go to Options-->Properties

3. Select all unmarked devices listed in the lower frame. Click on "OK" and confirm that the source you have chosen is not muted.

Should you use the Mic In on your laptop, be sure the Mic Boost is not activated.

The same procedure can be used to activate the recording source for other software such as WinDVR. Perform steps 1 and 2 from above. Then select the menu point "Recording" and follow step 3 above, selecting the source you wish to record from.

y

TerraTec Electronic GmbH
Herrenpfad 38
D-41334 Nettetal

tel: +49-2157-81790
fax: +49-2157-817922

hotline: +49-2157-817914
ftp: ftp.terratec.de
www: www.terratec.com